REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz M-Class (W163, 1997 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W163
		Introduction
		Controls and receptions of safe operation
		Current care and maintenance
		Engine
		System of cooling, heating and air conditioner
		The power supply system and exhaust
		Systems of an electric motor
			Ignition and engine control
			System of preheat of the diesel engine
			Diagnostics of systems of electronic control and diagnostic equipment
			Charge and start systems
				general information
				Battery - general information, tips for maintenance
				Charge system - the general information and safety measures
				Checking the charge
				Removing and installing the generator
				Removal and installation of the drive pulley of the generator
				Removing and installing voltage regulator
				The system start the engine - the general information and precautions
				Removing and installing starter
		Manual box of a gear change
		The transmission automatically processed
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric

printable version

Charge and start systems

Battery on all models of the M-class is placed in the right rear corner of the engine compartment

1 - Ground wire
5 - Ike
G1 - Battery
W16 / 4 - Exit the mass body assembly

All covered in this manual cars have an electrical system that operates with a voltage of 12 V. The connection passes through the mass of the negative terminal of the battery. The battery fits the engine compartment.

To start the engine using the starter motor. Starter switch is part of the ignition switch and turn on the turn-ons installed on the starter magnetic switch.

Built into the dashboard control light indicates charging perfect operation of electrical equipment until the battery is normal.

« previos page
Application of the oscilloscope for monitoring the performance of the control system

next page »
general information