printable version

Removal and installation of the fuel coming from the fuel filter to the fuel line - models 163,154,157 / 172/174/175

Details of the installation of the fuel, which connects the fuel filter with a distribution manifold models 163,154,157 / 172/174/175 (112 series engines and 113, except 113.981)

PERFORMANCE ORDER

Details of the installation of the fuel, which connects the fuel filter with a distribution manifold models 163,154,157 / 172/174/175 (112 series engines and 113, except 113.981) are shown in the illustration, which includes all the links in the text. Drive the vehicle on a lift. Open the hood and fix it in an upright position. Remove the trim panel of the power unit. Relieve the pressure in the fuel system through the service valve (see. Section Dropping pressure in the fuel system of a gasoline engine). Disconnect the fuel supply line (1), - drain the remaining fuel in the prepared container, immediately plug the open ends of lines. Remove both left wheels and wheel arch lockers protection. Remove the left bottom vents Stone Chip Protection. Remove the screws fixing the body to the chassis and lift the left edge of the body assembly. Disconnect the fuel line (2) from the fuel filter assembly (3), - immediately plug the open end of the line. Release fuel line (2) of the intermediate elements (4) on the frame and pull back, remove it from the vehicle. Installation is in the reverse order. Finally, check the fuel path for signs of leaks.