Separate characteristics are resulted also in the text of the Head and in case of compulsion of their performance are shown in bold
Lubrication of drive shafts
Inner CV joints, c
The outer CV joint, c
When replacing the protective cover of the hinge, if necessary, add grease.
1.1 liters of oil for hypoid gears SAE85W90 CF-235.7 or "BP Energear MBE?»
The angle between the axes (in brackets for the four-wheel drive models 4MATIC)
Transmissions and front propeller shaft, hail.
-0.5 ... + 0.67 (-0.6 ... -1.1)
The front and rear propeller shaft, hail.
+ ... 0.17 +1.0 (-0.6 ... +0)
The rear propeller shaft and differential degrees.
-0.83 ... -0.17 (-0.1 ... -0.9)
The diameter of the drive gear differential, mm
185 or 198
The gear ratio of the main transmission
Efforts of a tightening of carving connections, Nanometer
Fastener tightening torques are given in the text of the Head and on some graphics *.
* Highlighted text in bold torques are subject to exact observance; no bold efforts resulted only roughly
Bolts flywheel clutch
The rear engine mount / PPC
Bolts (3) cross back to the body
Bolt or nut fixing engine support to CPR
Flange nuts to the propeller shaft Transmission:
Propeller shaft flange nuts to the flange of the main transfer
Bolt back cover to the gearbox
Drain Plug Differential
Differential fill plug
Bolt driven gear to the differential