add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz G-class
Home
 
Mercedes-Benz
G-class
Introduction
Controls and operation receptions
Specifications
The first 1,500 km
The car equipment, arrangement of devices and controls
The devices provide comfort
Receptions of operation and auxiliary systems
Current care and maintenance
Engine
System of cooling, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Automatic Transmission
Transmission Line
Brakes and auxiliary systems
Suspension and steering
Body
Onboard electric
Wiring
 


Hit Counter by Digits


print page printable version

The first 1,500 km



The more carefully you treat the engine at the beginning of its operation, the more you will be satisfied with his work later.

Therefore, the first 1500 km you should move with variable speed and variable speed motor.

Avoid this period of great stress (movement with full throttle), try not to exceed 2/3 of the maximum permissible engine speed when driving on a selected program (red tachometer scale range).

If possible, try to avoid squeezing the gas pedal to the point of overcoming resistance (activation mode kickdown).

Do not make manual shifting to a lower gear for the purpose of engine braking. Install selector AT lever in position limit switch ranges only when driving at low speeds, such as in mountainous areas.

After the first 1500 km of run speed and engine speed can be gradually increased up to the limit values.

Extras Car equipment AMG: try the first 1,500 km moving at a speed exceeding 140 km / h and not to raise the engine speed over 4500 rev / min.





« previos page
Specifications
next page »
The car equipment, arrangement of devices and controls

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.