REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Almera (from 1995 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Almera
		General Information
		General requirements for car repair
		Operation and maintenance of car
		Petrol engines
		Diesel engines
			Overview
			The cylinder block and krivoshipnoshatunny mechanism
			Valve gear
			Cooling system
			Lubrication system
			Power system
				Design features
				Removing and installing high-pressure pump
				Adjusting the pump
				Check of adjustment of pump
				Adjusting the engine idle CD20
				Adjusting maximum speed without engine load CD20
				Adjusting damper drives fuel management
				Replacing pump belt
				Removal of air and sediment from the fuel filter and fuel system
			The engine management system CD20
			The engine management system CD20E
			Exhaust
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Applications
		Scheme of electrical equipment

printable version

Removal of air and sediment from the fuel filter and fuel system

Fig. 3.42. Removal of air and sediment from the fuel filter fuel system: 1 - manual fuel pump; 2 - drain valve

Press the hand several times on the head Primer Pump (Fig. 3.42) until resistance is felt. Keep pumping, dropping the engine to the normal engine operation. Stop the engine and repeat the operation again. To remove sediment from the fuel filter, open the drain valve at the bottom of the filter and drain the sediment in a container.

« previos page
Replacing pump belt

next page »
The engine management system CD20