add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Micra (2002 model year)
general info. full specifications. diagnostics. hints. tips. tricks
 Nissan Micra
Home
 
Nissan
Micra
Introduction
Controls and operation receptions
Options and car routine maintenance
Engine
The engine cooling system, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Manual box of a gear change and clutch
Manual box of a gear change
Clutch
general information
Removing and installing clutch pedal
Bleeding the clutch
Removal and installation of the master cylinder
Removal and installation of the executive cylinder
Removing and installing clutch
Automatic Transmission
Drive shafts, steering knuckles and Hub assembly
Brakes
Suspension and steering
Body
Onboard electric
Diagrams
 


Hit Counter by Digits


print page printable version

Bleeding the clutch



Make sure that the brake fluid reservoir has not appeared empty. When working with brake fluid observe precautions - fluid is poisonous!


PERFORMANCE ORDER

  1. Fill the reservoir with fresh brake fluid.
  1. Remove the rubber cover and connect the transparent hose to the bleeder valve coupling.
  1. Raise one step from the pin side of the tube.

Do not remove the pin completely.

  1. Slowly and fully depress the clutch pedal release 15 times at intervals of 2 ÷ 3 seconds. Keep the pedal to prevent the weakening of the tube to the bleeder valve when subjected to pressure.
  1. Slide tube 5 mm in the direction indicated by the arrow and drain fluid.
  1. Return the handset to its original position.
  2. Release the clutch pedal and wait 5 seconds.
  3. Repeat the steps described in paragraphs 4 through 7 until the effluent air bubbles will not disappear.




« previos page
Removing and installing clutch pedal		 next page »
Removal and installation of the master cylinder

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.