add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Micra (2002 model year)
general info. full specifications. diagnostics. hints. tips. tricks
 Nissan Micra
Home
 
Nissan
Micra
Introduction
Controls and operation receptions
Options and car routine maintenance
Engine
The engine cooling system, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Manual box of a gear change and clutch
Manual box of a gear change
Clutch
general information
Removing and installing clutch pedal
Bleeding the clutch
Removal and installation of the master cylinder
Removal and installation of the executive cylinder
Removing and installing clutch
Automatic Transmission
Drive shafts, steering knuckles and Hub assembly
Brakes
Suspension and steering
Body
Onboard electric
Diagrams
 


Hit Counter by Digits


print page printable version

Removal and installation of the master cylinder



When working with brake fluid observe precautions - it is poisonous!


PERFORMANCE ORDER

  1. Pump the brake fluid reservoir fluid and remove the hose from the nipple.
  1. Unhook the master cylinder rod from the clutch pedal.
  1. Remove the master cylinder pin and disconnect the tube clutch.
  1. Turn the master cylinder in a clockwise direction at an angle of 45 degrees. and remove it.
  2. Installation is in the reverse order. After installation, adjust the position of the clutch pedal (see. Section Checking brake and clutch).




« previos page
Bleeding the clutch		 next page »
Removal and installation of the executive cylinder

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.