REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Micra (2002 model year)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Micra
		Introduction
		Controls and operation receptions
		Options and car routine maintenance
		Engine
		The engine cooling system, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Manual box of a gear change and clutch
			Manual box of a gear change
				general information
				Removal and installation Manual transmission
				Removal, check and installation of the gauge of neutral and reverse
				Removal and installation Manual transmission breather hose
				Removal and installation of the drive gear
				Construction and Repair Manual transmission
			Clutch
		Automatic Transmission
		Drive shafts, steering knuckles and Hub assembly
		Brakes
		Suspension and steering
		Body
		Onboard electric
		Diagrams

printable version

Removal and installation of the drive gear

Components installation drive gear

PERFORMANCE ORDER
Cnimite center console and gear lever gaiter (see chap. Body).
Remove the bolts assembling the gear lever.
Press the removal of locking Manual transmission disconnect a cable from the assembly, and the shift lever.
Remove the cables from the bracket 1.
Remove center muffler and thermofilter.
Remove the bracket from the vehicle 2.
Remove the front and rear holders assembly gear lever and remove it together with the cables from the car.
If necessary, remove the gear lever knob by pulling it up.
After removing the handle reinstall it is not allowed.
Installation is in the reverse order.
Ensure the correct operation of the drive gear: all the gear should include clear.

« previos page
Removal and installation Manual transmission breather hose

next page »
Construction and Repair Manual transmission