 printable version
The doors and boot lid
Locking and unlocking the doors with the remote control To lock the lock, remove the key from the ignition, close all doors and press the lock button on the remote control (see. Illustration Buttons uniform lock on the remote control). Direction indicators flash once, confirming serviceability of operation of the locks. If clicking the button again, the direction indicators will flash once again, recalling. that the locks have closed. For unlocking press the corresponding button on the remote control - will unlock the driver's door lock and the direction indicators will flash twice. If within 5 seconds after unlocking the driver's door, press the unlock button again will unlock all doors. Direction indicators blink two or three times (respectively using the remote type A or B). If within about 2 minutes after complete or partial unlocking any door is opened or the key will not be installed in the ignition, automatic locking triggered. Locking and unlocking the doors with the system ?�Intelligent Key?�  | Normal functioning of the system ?�Intelligent Key?� can be disrupted due to the influence of external factors. In such cases, use a spare key, which is inside the transmitter. |
Before locking the doors, make sure that the remote system ?�Intelligent Key?� are not left in the vehicle, and then all the doors. Press the switch to lock the handle of one of the doors. Will lock all the doors and once blink turn indicators. For unlocking press the appropriate button in the handle of a door - only this will unlock the door and turn indicators will flash twice. If within 5 seconds after unlocking the door one press the unlock button again will unlock all doors. Direction indicators will flash 3 times (first once, then twice briefly). Locking and unlocking the doors when the battery is discharged In this situation, the driver's door can be locked and unlocked using the primary or alternate key.  | Unlocking and locking the door lock key |
To lock / unlock carefully remove the cover from the driver's door handle, insert the key into the slot of the lock cylinder and turn the key in the desired direction. | Lock is locked and unlocked in this way only when the door is closed. |
When the vehicle locking system more after charging or replacing the battery additional lock must be removed. To do this, insert the key into the lock and the ignition switch and turn it to ?�ON?�. It is also possible for this purpose to unlock the passenger door lock with the key or remote control. Locking the doors with a single lock switch  | Locking the doors with the switch of a single lock, do not leave the keys in the car. |
 | Switch a single lock on the center console |
The switch of a single lock, located on the center console allows the driver's door with a closed lock and unlock all the doors of the car. However, if the system is an additional lock is active, this switch does not allow to unlock the doors. To lock all doors turn the single lock position ?�LOCK?� while the driver's door open, then close it. This should not be the key in the ignition lock and key ?�Intelligent Key?� must be located outside the vehicle. On models with an additional lock for the given method of locking locks additional lock is not activated. If you are in the car, press the lock button on the key fob locks ?�Intelligent Key?�, all doors will lock and the indicator lights switch uniform lock. At the same time unlock the doors via a single switch lock will not be possible. For unlocking press the corresponding button on the remote control. If you open the driver's door to lock the doors using a single switch lock and at the same remote control ?�Intelligent Key?� will be in the car, then the driver's door is closed all the doors unlocked, and the buzzer will sound. This precaution is provided in order to avoid locking of the door lock when left inside a key fob ?�Intelligent Key?�. Emergencies on vehicles with an additional locking If the additional locking triggered when an accident or other unexpected reason, finding the driver inside the car, follow these steps. Insert the key into the ignition and turn it to ?�ON?�. The additional lock will be canceled. After unlocking the door can be opened from inside the car. Open a window or break the glass front passenger door. Remove the protective cover from the passenger door exterior handle, insert the key into the slot of the lock, unlock it by turning the key. You can then open the door and get out of the car. Remove the key from the ignition lock and unlock the doors with the remote control. Additional lock the back door lock  | Switch additional locking tailgate |
In the rear doors, an additional locking designed to prevent them from opening on the back seat of the children. To the back door can not be opened from the inside, move the lever to lock (the door in the end) in the "lock" position and close the door. Now it can only be opened from the outside. In order that the door can be opened from the inside again, open it from the outside, and return the lever to its original position. Tailgate lock The uniform lock provides locking and unlocking of all doors, including the tailgate. If the car is unlocked, the rear door lock can be unlocked manually from outside the car. To do this, use the microswitch located on the bottom of the tailgate. The tailgate can not be unlocked from the outside if the car is locked with a single lock. In this case, when you press the microswitch located warning beep sounds (models with remote control type A - see. Illustration Buttons uniform lock on the remote control).
| 
