add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf II, Jetta (from 1983 to 1992, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 2 / Jetta
Home
 
Volkswagen
Golf 2 / Jetta
General Information
Engine
Removing and installing engine
Disassembly and assembly of the engine
Engine lubrication system
Changing the oil filter
Replacing the oil cooler (diesel engines)
Engine cooling system
Exhaust
The power supply system
Coupling
Transmission
Transmission
Front-wheel Drive
A steering
Suspension
Brakes
Body
Electrical
 


Hit Counter by Digits


print page printable version

Replacing the oil cooler (diesel engines)



Details of the lubrication system of the diesel engine

1 - the oil drain plug;
2 - O-ring;
3 - the oil sump;
4 - the bolt of the crankcase;
5 - installation of casing;
6 - oil receiver the oil pump;
7 - a bolt of fastening oil receiver;
8 - a sealing ring of oil receiver;
9 - a cover of the oil pump;
10 - driven gear;
11 - oil pump housing;
12 - oil level indicator;
13 - oil filler cap;
14 - the gauge of pressure of oil;
15 - a bolt of fastening of the vacuum pump;
16 - the holder of the vacuum pump;
17 - vacuum pump;
18 - installation of the vacuum pump;
19 - a gear wheel drive and vacuum pump oil;
20 - a lining of the oil filter bracket;
21 - a bolt of fastening of an arm;
22 - an arm of the oil filter;
23 - a sealing ring of the coolant;
24 - oil cooler;
25 - a nut of fastening of the cooler;
26 - the oil filter;
27 - roller pump;
28 - a bolt of fastening of the oil pump cover;
29 - a bolt of fastening of the oil pump

PERFORMANCE ORDER
1. Release hose clamps and remove the hoses from the cooler 24, the pre-marking them so as not to confuse the installation.
2. Remove the oil filter 26.
3. Unscrew the nut 25 and remove the cooler 24.
4. Bracket 22 Remove the O-ring 23.
5. Contact proverhnosti bracket 22 and the new cooling lubricant cover 24 VW AMV 188100-02.
6. In the groove bracket insert a new O-ring 23.
7. Install a cooler 24, to turn the nut 25 and tighten to 25 Nm (2.5 kgf-m).
8. Connect hoses to the cooler.
9. Install the oil filter.




« previos page
Changing the oil filter
next page »
Engine cooling system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.