add to favorites contacts sitemap
Volkswagen Golf II, Jetta (from 1983 to 1992, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 2 / Jetta
Golf 2 / Jetta
General Information
Removing and installing engine
Disassembly and assembly of the engine
Engine lubrication system
Engine cooling system
Removing and installing exhaust system
Replacing lambda probe
The power supply system
Front-wheel Drive
A steering

Hit Counter by Digits

print page printable version



1 - suspension ring muffler;
2 - the basic muffler;
3 - ring muffler suspension;
4 - a collar;
5 - clamp bolt;
6 - the additional muffler of the second stage;
7 - the additional muffler of the first stage;
8 - a collar;
9 - a reception pipe of the muffler;
10 - Spring bracket;
11 - a sealing ring;
12 - the exhaust manifold;
13 - a lining of a final collector;
14 - the catalytic converter;
15 - lambda probe;
16 - heat shield

The exhaust system consists of a reception pipe of the muffler 9, additional mufflers 6 and 7 (at engines in working volume of 1,1 and 1,3 l one additional muffler 7) and main silencer 2. Reception pipe 9 muffler joins at engines in volume of 1,6 and 1 8 liters to the exhaust manifold 12 spring clamps 10, while the engines of 1.1 and 1.3 liters of two semicircular brackets, strapped two bolts.

In engines with turbo charging reception pipe of the muffler attached to the turbocharger. To reduce vibration and stress in the exhaust system of the engine capacity of 1.1 liters and 1.3 installed flexible element - the bellows. On vehicles equipped with a catalytic converter 14, a shorter reception pipe of the muffler, t. To. The converter must be installed as close as possible to the engine, and one additional muffler. Lambda probe 15 to adjust the optimal composition of the exhaust gas is installed in front of the exhaust manifold. On cars equipped with catalytic converter and diesel turbo installed heat shield 16. All parts of the exhaust system are interconnected clamps 4 and 8 and suspended on rubber rings 1 and 3.

« previos page
Removal and installation of the water pump
next page »
Removing and installing exhaust system

Copyright © 2010 Trademarks belong to their respective owners. All rights reserved.