add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf II, Jetta (from 1983 to 1992, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Volkswagen Golf 2 / Jetta
Home
 
Volkswagen
Golf 2 / Jetta
General Information
Engine
The power supply system
Coupling
Transmission
Transmission
Front-wheel Drive
A steering
Suspension
Brakes
Body
Front bumper
Rear buffer
Cover the back buffer
Grille
Panel Rack
Front fender
Lokar
Decorative molding
Drains
Laths of the roof drains
Door handles
External door lock
Internal door lock
Adjusting the door lock
Door mirror
The upholstery of the door panel
Glass doors
Wind and lateral motionless glass
The inner door handle
Windows
Central door lock
Front seat
Tailgate
The mechanism of management of a heater
Electrical
 


Hit Counter by Digits


print page printable version

The mechanism of management of a heater



The mechanism of management of a heater

1 - the handle of the switch of the electric motor;
2 - washer;
3 - panel heater;
4 - the screw;
5 - an arm;
6 - Rod radiator valves; 		7 - draft damper lower air flow;
8 - draft damper air flow deflector;
9 - Clip;
10 - the lever;
11 - slider;
12 - the handle of the lever

Withdrawal

PERFORMANCE ORDER
1. Remove the handle of 1 switch motor.
2. Remove the handle lever 12.
3. Lift the panel heater in places 3 latches and remove the panel heater.
4. Disconnect the wires from the switch motor.
5. Remove the screws 4.
6. Remove the instrument panel.
7. Label colored electrical tape pull 6, 7 and 8 valves.
8. Disconnect from the clamps 9 envelope flap linkage.
9. Disconnect the thrust levers of valves.
10. To remove the bracket 5 heater control mechanism.

Setting

PERFORMANCE ORDER
1. Set the bracket 5 heater control mechanism.
2. Connect the rod 6, 7 and 8 to the damper lever 10 according to the previously made mark.
3. Secure Shell rods gates at the terminals 9 so that the ends of the membranes protrude from the clamp 5 mm.
4. Tighten the screws 4 mounting bracket to the dashboard.
5. Install the instrument panel.
6. Connect the wires to the switch motor.
7. Place and snap the panel heater 3.
8. Set the handle lever 12.
9. Set switch knob 1 motor.




« previos page
Tailgate		 next page »
Electrical

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.