 printable version
Central door lock
Central door lock
1 - mud cover;
2 - control unit for front right door;
3, 7, 9, 11 - tees;
4 - a control unit, rear right door;
5 - control fuel cap; | 6 - the plug;
8 - the tailgate control unit;
10 - electric;
12 - a control unit, rear left door;
13 - it controls the front left-hand door;
14 - the pipeline;
15 - electrically |
Central door lock consists of a motor pump, pipes, wires and electric door lock control units.
A warning  For normal operation of the central locking of doors after a long stay or replacement of the electric pump is necessary to make a few inclusions.
ELECTRIC
The electric central locking
| 1 - a belt;
2 - Block;
3 - conduit;
4 - tee;
5 - the case;
6 - electric |
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the fastening strap 1 electric pump. | | 2. Disconnect the two housing parts 5 and 6 remove electric. | | 3. Disconnect the pipe 3 by fitting the electric pump. | | 4. Disconnect the connector 2 with wires from the electric socket. |
|
Setting
The installation of the electric pump is produced in reverse order of removal.
CONTROLLER door lock
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the door trim panel (see. Subpart 11.16). | | 2. Unscrew the two screws on the control box door lock 2 (see. Fig. Central locking of doors). | | 3. Disconnect the wires from the connector to the control unit connector lock the door. | | 4. Disconnect the lock rod. |
|
Setting
The installation of the control box door lock is carried out in reverse order.
|
