 printable version
Rear bumper
Removing the rear bumper was performed as follows: - Lift the back of the car and establish on reliable support; - Unscrew the screws fastening the bottom of the bumper;
| Fig. 10.6. Details of the rear bumper and mounting: 1 - bumper; 2 - nut 25 Nm; 3 - energy-absorbing buffer; 4 - guide plate; 5 - gasket; 6, 8, 9 - plug; 7 - self-tapping screws
|
- Remove the decorative caps 6, 8, 9 (Fig. 10.6), covering the upper bolts of the bumper (they are under the opening rear doors or tailgate); - Loosen the fastening screws and remove the bumper; - Check the condition of energy absorbing bumper buffers 3 and, if necessary, replace them. Installing bumper is made in reverse order of removal.
| 
