Tool, trailer coupling, spare wheel

A standard set of tools attached to the vehicle, including the following items: a stripper wheel trims, towing eye, wheel wrench, the puller for caps wheel bolts, screwdriver with hexagon recess for wheel bolts, wrench 10?�13, jack, removable ball bearings and plastic cover for her (in vehicles with factory preparation for installation of the trailer coupling), a device for removal and installation of high-voltage wires tips (for vehicles with six-cylinder engine, is fixed to the inner surface of the hood).

Spare wheel, attached to the family car Golf III, as a rule, reduced size (so-called "dokatka"). It not only takes up less space in the luggage compartment, but also considerably lighter than usual. In some cases, vehicles were equipped spare wheel of normal size (vehicles with four-wheel drive ?�Syncro?�, install them spare tire sizes must not be reduced by the manufacturer). Recommended to pump it regularly. Using the reduced size spare tire, keep the following in mind:

- It is intended for temporary use only. At the first opportunity to replace it with a full-size;

- Do not drive a car with a spare wheel mounted at a speed exceeding 80 km / h;

- Avoid sudden acceleration, braking and cornering at high speed;

- Note that the spare wheel is smaller than normal diameter, respectively, on the side of the vehicle where it is installed, it decreases clearance (about 30 mm). Therefore, in order to avoid damage to the vehicle is not moved to its high obstacles and deep holes, do not enter in the automatic car wash;

- Spare tire designed specifically for the vehicle and replace it on the other, or to give to someone for mounting on a car different model is prohibited;

- Do not place the spare wheel drive any normal or winter tire;

- Do not place the vehicle more than one spare wheel.