add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B5 (from 1996 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B5
Home
 
Volkswagen
Passat B5
Instructions
Maintenance
Engines
Cooling
Fuel system
general information
The fuel pump / fuel level sensor
The fuel filter on models with petrol engines
Adjustment of a cable of an accelerator (the petrol engine)
Additional adjustment (an automatic transmission)
The fuel system of the diesel engine
Motor Control
An exhaust system
Transmission
Chassis
Steering
Brakes
Body
Heating, ventilation
Electrical
 


Hit Counter by Digits


print page printable version

Adjustment of a cable of an accelerator (the petrol engine)



The accelerator cable on models with engines 1,6-I and 1,8-I

1 - mounting plate accelerator cable. When removing rotated 90 ?� counterclockwise;
2 - O-ring accelerator cable on the bulkhead. Installed only in vehicles with manual transmission;
3 - clip. It can only be used on vehicles with manual transmission;
4 - Clip. It can only be used on vehicles with automatic transmission;
5 - the switch of compulsory inclusion of a downshift in the automatic transmission (kick down);
6 - electric two-pin connector;
7 - an accelerator cable;
8 - pulley on the throttle valve axis;
9 - a bolt, 10 Nm;
10 - mounting bracket shell accelerator cable;
11 - fixing bracket to adjust the accelerator cable;
12 - the accelerator pedal;
13 - an arm of the accelerator pedal;
14 - the accelerator pedal stroke limiter

Location fixing bracket that secures the cover of a cable of an accelerator in the four-cylinder engines


Location fixing bracket that secures the cover of a cable of an accelerator in the five-cylinder engine


Location fixing bracket that secures the cover of a cable of an accelerator in the six-cylinder engines


PERFORMANCE ORDER
1. Press the accelerator pedal up to the stop and fix it in this position.
2. Check that the throttle lever stared at maximum load limiter. If not, adjust the accelerator cable.
3. Remove the retaining bracket securing the cover of a cable of an accelerator to the bracket. See Fig. Location fixing bracket that secures the cover of a cable of an accelerator in the four-cylinder engines, Fig. Location fixing bracket that secures the cover of a cable of an accelerator in the five-cylinder engine, and Fig. Location fixing brackets, studs cover of a cable of an accelerator on six-cylinder engines.
4. Move the cover of a cable of an accelerator to the bracket until the throttle lever does not touch the peak load limiter. In this position, tighten the accelerator cable cable cover fixing bracket.
5. Release the accelerator pedal.





« previos page
The fuel filter on models with petrol engines
next page »
Additional adjustment (an automatic transmission)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.