REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Passat B6
		Operation and maintenance of car
		Engine
			Overview
			Mechanical (engine capacity of 1.6 liters)
			Lubrication system
			Cooling system
			Fuel Injection System
			The mechanical part (petrol engines of 2.0 liters)
			Lubrication system
				Checking oil pressure and oil pressure sensor
				Removal and installation of the oil filter
				Draining the oil filter housing
				Refitting the oil sump - engines BLX, BLY, BLR
				Removal of the oil pump driven balancer shaft
				Installation and adjustment of the oil pump driven balancer shaft
			System ohlazhdeiya
			Fuel system
			Injection system
			System of release of gases otrabotavschih
			Ignition system
			The mechanical part (diesel engines of 2.0 liters)
			Lubrication system
			Cooling system
			Fuel system
			Turbocharging turbo running on exhaust
			The direct injection diesel
			Exhaust
			Tables
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
		diagrams

printable version

Removal and installation of the oil filter

Withdrawal

Remove the suction tube.

Remove the coolant tube.

Fig. 2.169. Bolts oil cooler

Remove the oil cooler (Fig. 2.169).

Fig. 2.170. Bolts of the oil filter

1..2 Unscrew bolts and remove the holder of the oil filter (Fig. 2.170).

Setting

Replace gasket.

Install the oil separator.

Attach the oil filter and evenly tighten bolts 1 and 2 with a torque of 15 Nm.

NOTE

Weight wire for the oil pressure sensor must be mounted bolt 2.

Install the oil cooler.

Further installation and assembly is performed in reverse sequence to removal.

Motor oil

The oil filling:

- With the oil filter 4.6 liters;

- Without oil filter 4.1 liters.

Fig. 2.171. The marks on the dipstick: 1 - MAX mark; 2 - MIN mark; a - the oil level is near the mark max is not top up the engine oil; b - the oil level in the middle area of the engine oil can be topped up; c - the oil level is near the mark min pour about 0.5 liters of engine oil

Masloimeritelny probe is shown in Figure 2.171.

« previos page
Checking oil pressure and oil pressure sensor

next page »
Draining the oil filter housing