add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B6
Home
 
Volkswagen
Passat B6
Operation and maintenance of car
Engine
Overview
Mechanical (engine capacity of 1.6 liters)
Lubrication system
Cooling system
Fuel Injection System
The mechanical part (petrol engines of 2.0 liters)
Lubrication system
System ohlazhdeiya
Fuel system
Injection system
System of release of gases otrabotavschih
Ignition system
The mechanical part (diesel engines of 2.0 liters)
Lubrication system
Cooling system
Fuel system
Check the supply pressure
Removing and installing tandem pump
Checking the fuel pump
Removing and installing fuel delivery unit
Removing and installing fuel level sensor
Removing the fuel tank
Turbocharging turbo running on exhaust
The direct injection diesel
Exhaust
Tables
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

Removing and installing fuel delivery unit



Fuel Module
Fig. 2.340. Fuel Module



Withdrawal
First, you must check whether the car radio with coding. If so, you should know the security code.
With the ignition off, disconnect the battery ground cable.
When removing module fuel tank can be filled to a maximum of 1/2. If necessary - empty fuel tank.
Remove the rear seat.
Remove the cover of the fuel supply.
Disconnect the fuel feed line 1, 2 Fuel return pipe, the fuel feed pipe to the dosing pump 3 and 5-pin 5 from the flange of fuel delivery unit.

NOTE
To disconnect the fuel lines, click on the lock ring.


Opening of the locking ring
Fig. 2.341. Opening of the locking ring


Open locking ring using the key (Fig. 2.341).
Lift the sensor flange.
Disconnect the fuel line from the ejection pump 1.

NOTE
To disconnect the fuel line, click on the lock ring.


Cover ejection pump
Fig. 2.342. Cover ejection pump


Click on the cover 2 ejection pump in the direction of the arrow and release the pump from the fuel supply unit (Fig. 2.342).
Pull the fuel supply pump along with ejection from the orifice of the fuel tank.

NOTE
When replacing the fuel supply before disposing of the old feed module must be empty.

Setting
Installing the fuel delivery is carried out in reverse order.

NOTE
When installing the module fuel, take care not to bend the float arm the fuel level sensor.
Insert the O-ring flange / module fuel dry hole in the fuel tank.
Wetted O-rings should only be fuel for mounting the fuel supply module / flange.

Do not bend the fuel lines during installation.
Supply and return fuel lines in some places do not change (reverse fuel line blue or marked in blue, black Fuel flow line).
Watch the stocking density of the fuel hoses.
When you connect couplings fuel lines they have to Fix a clearly audible click.
After installing the module fuel check zaklipsovany whether fuel lines to the fuel tank.
Observe the installation position of the flange of fuel delivery unit.




« previos page
Checking the fuel pump
next page »
Removing and installing fuel level sensor

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.