 printable version
Removing and installing rear bumper fascia
| Fig. 8.3. The components of the rear bumper: 1 - facing the rear bumper; 2 - the screw; 3 - rivet with a notch; 4 - the screw; 5 - the screw
|
NOTE Depending on the model when removing and installing the rear bumper fascia must be considered minor deviations. |
Withdrawal
Remove the rear lights in the wing. 3 Remove the screws in the area of the fender liner on the left and the right. Using a screwdriver notch rivet 4 at the fender liner on the left and right. 2 Remove the screws from the bottom and release the clamp on the left and the right. Depending on the design of the exhaust system on the left and right sides are facing studs. 5 Remove the screws on the left and right under the rear lights. Further removal is possible only with the help of a second mechanic. Remove the rear bumper fascia in parallel from the guide profiles in the wings. Disconnect the electrical connections are available.
Setting Installation is carried out in reverse order. Watch for concurrency and size of the gap
| 
