add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Sharan (from 1995 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Sharan
Home
 
Volkswagen
Sharan
Introduction
VR6 engine
The two-liter engine (ADY)
Engine oil
Cooling
A fuel injection system VR6 engine
The system Simos injection 2.0-liter engine
The ignition system
Coupling
Manual 5-speed gearbox
The drive shafts
Power steering
Front suspension
Rear suspension
Refitting
Trailing arm / spring suspension - Removal and installation
Removal and installation of shock absorbers
Bearings rear wheels
Brakes
Electrical
Diesel engine
The lubrication system of the diesel engine
The cooling system of the diesel engine
The power supply system of the diesel engine and turbocharger
Map service.
Applications
Wiring
 


Hit Counter by Digits


интернет Тополек, снт

print page printable version

Rear suspension







Rear suspension
Fig. 297. Rear suspension: 1 - subframe (cross-beam); 2 - anti-roll bar; 3 - spring; 4 - wheel unit; 5 - the lower arm; 6 - shock





In Fig. 297 shows a device rear suspension. The rear suspension is (on each side) from the bottom of the trailing arm, coil spring, gas spring and stabilizer bar. Wheel hub installed in the longitudinal arm. Sam trailing arm rear suspension is mounted on a stretcher.
Shock absorbers and springs are located between the lower trailing arms and the bottom of the machine. On machines with leveling (Nivomat) set a special device that prevents large deviations of the height of the vehicle at different loads.




« previos page
The angle of inclination of the longitudinal axis of rotation
next page »
Refitting

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.