printable version
Repair of the water pump
VR6 engine The water pump can not be repaired, so when a fault is detected, replace with a new one. 2.0-liter engine The water pump can not be repaired, so in the event of a fault in it, replace it with a new one.
| Fig. 188. The pump is water-cooled 2.0-liter engine disassembled: 1 - a bolt, 25 Nm; 2 - a pulley; 3 - bolt 10 Nm; 4 - the water pump; 5 - installation and replacement; 6 - thermostat; 7 - O-shaped sealing ring is always substitution; 8 - coupling; 9 - a collar; 10 - a cover of the thermostat; 11 - V-belt pulley
|
To replace the thermostat, unscrew the pump and remove the thermostat 6 (see. Fig. 188). Remove the 3 bolts securing the pump from its housing and remove the pump. Remove the gasket 5 between the two halves of the pump housing. Before you screw the pump to the body, install a new gasket, replace an O-ring sealing the thermostat housing. Can be removed and replaced, respectively, the parts shown by (see. Fig. 188).
|