 printable version
The handle of the front door
Withdrawal Remove the door trim. Lower the way down the front door glass.
| Fig. 16.35. The handle of the front door 1 - door handle; 2 - a clip; 3 - draft; 4 - the plug; 5 - dowel pin; 6 - door lock
|
Disconnect draft from 3 (Fig. 16.35) of the pivot arm 2 door handle 1.
| Fig. 16.36. The dimensions of the special tool to facilitate removal of the handle opening the door: a = 300 mm; b = 20 mm; c = 10 mm; d = 10 mm
|
Steel wire fabricate a special tool that simplifies the removal of the door handle (Fig. 16.36).
| Fig. 16.37. Using a special tool (3) for biasing the locator pin (2) with the pivot arm (1) when removing the door handles A and B - the direction of movement
|
Hook Hook special tool 3 of the swivel arm 1, as shown in Fig. 16.37, and slide the dowel pin 2 in the direction of the arrow A.
| Fig. 16.38. Using a special tool (3) for removing the dowel pin (2) with the pivot arm (1) when removing the door handle (4): A, B and C - the direction of rotation and displacement
|
The special tool 3 2 pull adjusting pin from the pivot arm 1 in the direction of arrow A, as shown in Fig. 16.38. Turn up the rotary arm 1. Thin blade screwdriver to slide slightly lifting the retainer B. Wrench to turn in the direction of the upper arrow C tab and remove the outside door handle 4 with a cylinder lock. On the inside of the door, remove the door handle support member.
Setting Installation is spent to sequences, return to removal, taking into account the following. Wrench to turn in the direction of arrow C lower tab and fix the door handle to lock cylinder 4 on the door.
| Fig. 16.39. The direction of pressing a special tool for pressing the mounting pin (2) in the pivot arm (1)
|
The special tool push the dowel pin 2 (Fig. 16.39) in the direction of the arrow in the rotary arm 1.
| Fig. 16.40. Mounting bracket mounting pin (2) of the pivot arm (1): A - locking projection brackets; In - place expanding rivet
|
At the same bracket (Fig. 16.40 arrow B) dowel pin 2 should be clearly stated for the swivel arm 1. Fix the swing arm to the clamp rod. Refit the door.
| 
