add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Audi A6 (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Audi A6
Home
 
Audi
A6
General Information
Operation of the vehicle
Maintenance
Engines
Ignition, fuel injection and exhaust of gasoline engines
The power supply system, and preheating the exhaust gases of diesel engines
Lubrication System
Overview
Recommendations for use of motor oils
The oil pan and oil pump gasoline engine 1.8 liters
The oil pan and oil pump petrol engines of 2.4 and 2.8 liters
Sump petrol engines of 2.4 and 2.8 liters
Removing the lower section of the sump 2.8-liter petrol engine
Installing the lower section of the oil pallet
Removing the top section of sump gasoline engine 2.4 and 2.8 liters
The oil pump petrol engines of 2.4 and 2.8 liters
Installing the top section of the oil pan
The oil pan and the oil pump of the diesel engine of 1,9 l
The oil pan and the oil pump of the diesel engine of 2.5 liters
Cooling system
Coupling
Transmission
The front wheel drive shafts
Design features four-wheel drive transmission
Suspension
Wheels and tires
Steering
Brakes
Body
Heating and air conditioning
Electrical
Electric schemes
 


Hit Counter by Digits


print page printable version

The oil pump petrol engines of 2.4 and 2.8 liters



Remove the timing belt.

Elements of crankshaft pulley
Fig. 6.26. Elements of crankshaft pulley 1 - the toothed belt pulley of the crankshaft; 2 - remote bush; 3 - a bolt


3 Remove the bolt (Fig. 6.26) crankshaft pulley.
Remove the spacer sleeve 2 and 1 toothed belt pulley.
Remove the upper section of the oil pan

Location idle bolts (3) and the tensioning (1) clips, bolts (5) and lever (4) a tightening mechanism, and a valve (2) of the injector
Fig. 6.27. Location idle bolts (3) and the tensioning (1) clips, bolts (5) and lever (4) a tightening mechanism, and a valve (2) of the injector


Remove the bolts idle 3 (Fig. 6.27) and the tensioning rollers 1, 5 and tensioner arm 4.
2 Remove the valve nozzle.
Disconnect the electrical connector from the oil temperature sensor.

Location bolts of the oil pump
Fig. 6.28. Location bolts of the oil pump


Remove the bolts and remove the oil pump from the front of the engine (Fig. 6.28).




« previos page
Removing the top section of sump gasoline engine 2.4 and 2.8 liters
next page »
Installing the top section of the oil pan

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.