add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Technical data
Choice of motor oil
Oil pressure sensor
Check engine oil level
Replacing the engine oil
Changing the oil filter
SOHC engine oil pump
The oil pump of engine DOHC
Cooling
Control, reduced toxicity
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Steering
Brakes
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Changing the oil filter



All engines are equipped with high-quality, disposable oil filter.


A warning

When replacing the motor filter, be careful because the oil is hot and may cause burns.


PERFORMANCE ORDER
1. Special wrench, remove the oil filter. If the rubber sealing ring of the oil filter is left on the cylinder block, remove it.
2. Apply a thin layer of engine oil rubber sealing ring of the new oil filter.
3. Replace the oil filter to a contact of the O-ring of the oil filter to the engine block and tighten it by hand.
4. Start up the engine and check for oil leaks.
5. Turn off the engine and wait 5 minutes for draining oil in a pan. Check the engine oil level and, if necessary, finish it to norm.




« previos page
Replacing the engine oil
next page »
SOHC engine oil pump

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.