add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Technical data
Checking the oil level
Changing the transmission oil
Replacement of an oil sealing ring of a power shaft
Removing and installing transmission
The gear change mechanism
Troubleshooting
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Technical data



Technical data

Model
M5BF2
Engine
1,6 DOHC
1,8 DOHC
2,0 DOHC
Type 5 assists for the forward and one transfer to move backward
Ratio
1st gear
3,615
3,615
3,615
2nd gear
2,053
2,053
2,053
3rd gear
1,393
1.37
1,393
4th gear
1,061
1,031
1,061
5th gear
0.837
0.837
0.837
Reverse gear
3.25
3.25
3.25
Final drive ratio
4.056
3,842
3.65

general information

Transmission converts the torque transmitted from the engine in magnitude and direction. This is necessary for optimal vehicle speed and terrain, as well as for the most economical operation of the engine and the vehicle is moving in reverse. In addition, the transmission separates the engine and transmission during a stop and parking lot, and when it is coasting with the engine running.
Items placed in the transmission housing, which bolt is screwed to the rear of the engine.

The torque from the engine is transmitted through the clutch to the transmission input shaft. The output shaft of the gearbox transmits torque through the differential to the drive shafts. Enabling is performed by moving the sliding sleeve of the synchronizer, whereby the gear is rigidly connected to the shaft of a transmission.

The transmission represents very difficult unit and its repair should be performed by a specialized workshop, so in this chapter are only removing and installing the transmission.
To remove the gearbox is necessary to raise the car and secure it in this position. Also, you must use stationary jack.





« previos page
Manual transmission
next page »
Checking the oil level

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.