add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Santa FE (2006 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Santa FE
Home
 
Hyundai
Santa FE
Operation and maintenance of car
Engine
Maintenance (engines 2,0 / 2,4 l)
Check engine oil level
Replacing the engine oil
The choice of the oil filter
Changing the oil filter
Checking the tightness of the cooling system
Check valves radiator cap
Check the antifreeze concentration
Compression Test
Adjusting the tension of the ancillary drive belt
Belt tensioner mounted units
Adjusting the alternator drive belt
Adjusting the drive belt power steering pump and the air conditioner
Mechanical (engines of 2.0 / 2.4 L).
Cooling system (engines 2,0 / 2,4 l)
Intake and exhaust systems (engines 2,0 / 2,4 l)
Maintenance (2.7 liter engine)
Mechanical (engine displacement of 2.7 liters.)
Cooling system (engines of 2.7 liters)
Lubrication System (engines of 2.7 liters)
Emission
Fuel system
Tables
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

Changing the oil filter



ATTENTION
Be careful not to burn, as the engine oil is hot.

With the help of a special key, remove the engine oil filter.

Application of engine oil on the filter gasket
Fig. 2.3. Application of engine oil on the filter gasket


Before installing the new filter on the engine Apply a small amount of clean engine oil filter gasket (Fig. 2.3).
Tighten the oil filter to the specified torque.
The tightening torque of the oil filter: 12-16 Nm.
Start the engine and check for leaks of engine oil.
Stop the engine and check the engine oil level. If necessary, add oil.




« previos page
The choice of the oil filter
next page »
Checking the tightness of the cooling system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.