 printable version
The front seats
Adjusting the longitudinal position of the front seats
| Fig. 1.143. Adjusting the longitudinal position of the front seats
|
To move the seat longitudinal position, raise the control lever up. Release the seat and move it back and forth in a comfortable position. After installing the release control lever and slightly move the seat forward or backward to lock it in position.
ATTENTION Ensure that the fixing seat, moving it forward or backward without using the lever of adjustment. |
To tilt the seatback
To tilt the seat back bend forward to remove your weight from the back seat, and pull the lever to adjust the backrest angle is located on the outside of the seat up. Click on the seat back and insert it into the desired position. to lock the seat back in a new position, release the lever to adjust the backrest.
ATTENTION In order to reduce the risk of injury in a car accident (crash) or sudden stop when driving, the seat backs of the driver and front seat passenger should be in a position as close as possible to the vertical. |
The effectiveness of the protection of seat belts and air bags is greatly reduced when the seat back is tilted. There is a strong likelihood that when the seat back is tilted, the driver and front passenger can slide out from under the belt that will cause serious injury in a collision of a vehicle during a traffic accident (crash). The seat belt can not provide full protection of the passenger when the seat is tilted back his.
Adjustable head restraints
Head restraints protect the neck. To raise the headrest, pull it up. to lower the head restraint, push it down while pressing the tab. to remove the headrest, pull it all the way by clicking on the lock.
ATTENTION To reduce the risk of injury in a collision set the height of the head restraint so that its center is located at eye level. If between the back and the seat back cushion is or anything like that, the distance between the head and the head restraint and increases the effectiveness of the head restraints in the event of an accident is reduced. It is dangerous to ride in a vehicle with improperly adjusted head restraints or no. Be sure to verify proper installation and adjustment of the head restraints. Otherwise, you may receive a serious injury of the neck at a traffic accident (crash). Do not adjust the headrest while driving. |
Tilt the headrest forwards and backwards
| Fig. 1.146. Tilt the headrest forwards and backwards
|
The headrest can be tilted forward in three different positions. to return the headrest back and move it forward to the end position, then release. You should install the headrest so that it properly supports the head and neck.
Automatically adjustable head restraints (optional) Automatically adjustable head restraints for rear impact are able to move forward and upward. Due to this he held the head of the driver and front passenger from a strong cast back and thus prevents neck injury that commonly occurs even with relatively light accidents.
Adjustable lumbar support (driver's seat only) (optional)
| Fig. 1.147. Adjustable lumbar support: 1 - poor support; 2 - strong support
|
To adjust the lumbar support, turn the lever to its adjustment, located on the inner end of the driver's seat back. To increase the strength of support, move the lever toward the front of the car. To loosen the support force to move the lumbar adjustment lever toward the rear of the vehicle.
Adjustable seat height (for driver's seat)
In order to raise or lower the front part of the seat cushion, rotate the front handle forward or backward. In order to raise or lower the rear of the seat cushion, rotate the rear handle forward or backward.
| 
