 printable version
Towing a vehicle with a view to starting the engine
All-wheel drive models  | To avoid loss of oil or disconnect the rear propeller shaft from the transfer case. |
| - Switch the transmission to neutral.
- Move the transfer case lever to the neutral position (control lamp lights wheel drive mode and the four wheels of the car on the edge image on-screen graphical display must go out.
- Switch transfer case to the transmission, the AT - in D, and make sure the car can not budge.
- To unlock the steering column, turn the ignition key to OFF.
- AT Move to position R.
- Connect the car tight coupling to a towing vehicle.
| In no case Do not attach tow bar for a bumper car! |
|
|
2WD models The rear propeller shaft while being towed must be disconnected from the transmission - a hole in the crankcase to prevent oil loss should be muted stopper. Move the selector lever to position P. Before starting the independent movement do not forget to connect the driveshaft to the place to check the transmission oil level.
|
