add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Jeep Grand Cherokee (from 1993 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Jeep Grand Cherokee
Home
 
Jeep
Grand Cherokee
Introduction
Adjustment and routine maintenance
The straight six-cylinder engine
The V8 engine
Procedure of the general and engine major repairs
Systems of cooling, heating and air conditioning
The power supply system and exhaust
The system of electric motor
Systems of decrease in toxicity of the fulfilled gases and engine management
Manual box of a gear change
Automatic Transmission
general information
Troubleshooting - General Information
Removing and installing selector lever
Check and adjustment of a cable switch
Description, replacement and adjustment of the throttle cable mode kickdown (TV-cable)
Check of adjustment and replacement of the gauge-switch of the permission of start
Adjustment of a cable parking bollard
Check and replacement of support of transmission
Replacing the gland
Description of the construction, removal and installation of lines and transmission cooling hoses
Removal and installation of additional cooling
Removing and installing automatic transmission
Replacing the transmission control module (TCM) (only for the AW-4 and 42RE)
Diagnosis of electronically controlled automatic transmission
Transfer Case
Clutch and transmission line
Brakes
Suspension and steering
Body
The system of on-board electrical equipment
Controls and operation receptions
 


Hit Counter by Digits


print page printable version

Automatic Transmission



Specifications

Common parameters

Bolt length converter of rotation (mm)

  • 42RE
    • At the 3-hairpin, 9.5-inch (241 mm) converter

11.7

    • At the 4 hairpin, 10.75-inch (273 mm) converter

11.2

  • 42RN / 43RN
    • At the 3-hairpin, 9.5-inch (241 mm) converter

11.7

    • At the 4 hairpin, 9.5-inch (241 mm) converter

13.2

    • At the 4 hairpin, 10.0-inch (254 mm) converter

13.2

    • At the 3-hairpin, 10.75-inch (273 mm) converter

11.2

Efforts of a tightening of carving connections, N ??? m

Bolts of fastening of transmission to the engine
  • AW- 4 (see.
    • Bolts "A"
50 - 64
    • Bolts / nuts "B"
18.0 - 22.9
  • 42RE (see.
    • Bolts "A"
50 - 64
    • Bolts "B"
thirty - 35
    • Bolts "C"
10.8 - 20.3
    • Bolts ?źD?╗
47 - 54
  • 42RN / 46RN
    • Bolts "A"
3,4 - 5.7
    • Bolts "B"
27 - 54
    • Bolts "C"
47 - 88
    • Bolts ?źD?╗
9,0 - 13.6

Bolts disk drive to the drive rotation

  • AW-4
thirty
  • 42RE
    • At the 3-hairpin, 9.5-inch (241 mm) converter
54
    • At the 4 hairpin, 10.75-inch (273 mm) converter
30.5
  • 42RN / 46RN
    • At the 3-hairpin, 9.5-inch (241 mm) converter
    • At the 4 hairpin, 9.5-inch (241 mm) converter
54
    • At the 4 hairpin, 10.0-inch (254 mm) converter
75
    • At the 4 hairpin, 10.75-inch (273 mm) converter
75
The gauge-switch start authorization
30.5
AW-4 (only 1993 issue.)
  • Adjusting bolt
12.2
  • Adjusting nut
6.9
  • All others (1994 and 1995 issue.)
34
Bolt speed sensor transmission (models AW-April 1993 issue.)
7.3
Vehicle speed sensor (VSS) / nozzle speedometer
  • Screw fixing probe
1,7 - 3.1
  • Fixing screw heads
10.2 - 12.4




« previos page
Overhaul Manual transmission - General Information
next page »
general information

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.