add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Magentis
Home
 
Kia
Magentis
Engines
Lubrication System
Cooling system
The control and toxicity
Fuel system
Ignition system
Coupling
Technical data
Bleeding the hydraulic clutch
The clutch pedal
Master Cylinder, clutch pipes and hoses
Clutch Master Cylinder
Clutch slave cylinder
The housing and clutch discs
Troubleshooting
Transmission
Power shafts, axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Clutch slave cylinder



Dismantling

PERFORMANCE ORDER

1. Remove the hose coupling, valve plate, spring, pusher and cover.
2. Remove the dirt from the hole for the piston in the cylinder clutch.

3. Remove the piston and the sleeve by means of compressed air through the hole to connect a hydraulic tube.

Cover the opening of the working cylinder with a clean cloth to catch the expelled compressed air piston.

Compressed air supply slowly to avoid splashing of the brake fluid.

Check

PERFORMANCE ORDER

1. Check the clutch slave cylinder for damage.
2. Check the covers for damage.

3. Measure the inner diameter of the clutch slave cylinder. Measure the inside diameter of the clutch master cylinder held in three sections (at the bottom, center and top) in two perpendicular directions. If the clearance between the piston and the cylinder exceeds the limit, replace the master cylinder and / or piston assembly.

Clearance: 0.15 mm

Assembly

PERFORMANCE ORDER

1. Before assemblage grease liquid for coupling the piston and the cylinder bore diameter and set the piston assembly.

Fluid: Brake fluid DOT 3

2. Install hose coupling, valve plate, spring, pusher and cover.

Setting

PERFORMANCE ORDER

1. Before installation, lubricate the sleeve, pin, washer and a pin with a head and a hole for the pin.

Grease: CASMOLY L9508

2. Set the slave cylinder and connect a hydraulic tube.





« previos page
Clutch Master Cylinder
next page »
The housing and clutch discs

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.