REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
			Technical data
			Coolant
			Checking the coolant level
			Quality of coolant
			Checking the tightness of the cooling system
			Substitution coolant
			Check the radiator cap
			Back pressure valve
			Thermostat
			Radiator fan relay
			Engine radiator fan
			Radiator
			Water pump
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Thermostat

Thermostat

1 - a casing of the thermostat;

2 - a lining;

3 - Thermostat

Withdrawal

PERFORMANCE ORDER

	1. Disconnect the negative battery terminal.
	2. Drain the coolant into a suitable container.
	3. Remove the nut and bolt casing of the thermostat.
4. Remove the cover of the thermostat and thermostat.

Check

PERFORMANCE ORDER

1. Visually check the condition of the thermostat.
2. Suspend the thermostat on a string in a transparent container with water.
	3. Insert the thermometer into the water, heat the container with water and watch the thermostat valve. Determine the temperature of the start of opening and fully open the valve of the thermostat. The onset temperature of the thermostat valve opening: 80,5-83,5 ?� C. Valve opening temperature of the thermostat: 95 ?� C. Thermostat valve stroke: 8.0 mm

Setting

PERFORMANCE ORDER

1. Set the thermostat into the cylinder head so that the bleed screw located on top.
	2. Establish a new lining of the thermostat.
	3. Set the thermostat casing and fix a bolt and nut. Tightening torque: 19-26 Nm
4. Fill in the required amount of cooling required coolant.
	5. Connect the cable to the negative terminal of the battery.
6. Start the engine and check for leaks from the cooling system.