add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Mazda 6
Home
 
Mazda
6
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Overview
General checks
Working with a steering operation
Precautions with the system of passive safety (SRS)
Removal, check and installation of the steering wheel and steering column
Withdrawal
Setting
Disassembly of the steering mechanism and steering rods
Check the steering gear and steering rods
Removing and installing power steering pump
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Setting



Set the detail mechanism of the steering lock on the steering shaft.
Ensure proper operation of the locking mechanism.
Install new bolts of the locking mechanism.

Tightening the bolts of the locking mechanism
Fig. 5.14. Tightening the bolts of the locking mechanism


Tighten bolts to the breaking off heads (Fig. 5.14).

Bolts of fastening of a steering shaft
Fig. 5.15. Bolts of fastening of a steering shaft


Lock lever tilt steering column (Fig. 5.15).
Tighten the bolt A.
Tighten the nut B.
Tighten the nut C.

ATTENTION
Do not apply blows in the direction of the shaft axis.

Install the wheel of a car in the straight-ahead position, install the steering wheel.




« previos page
Withdrawal		 next page »
Disassembly of the steering mechanism and steering rods

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.