Folding the rear seats in the all-wheel drive cars with a body "versatile"

1. Undo the lap belt pretensioner mounted on the central rear seat. Always unfasten the lap strap of the central belt before folding the left rear seat backrest. If left waist strap buckle up the seat belt, seat belt and the seat back may be damaged (Fig. 1.123).

2. Hold the back of the hand.

3. Press the release button back.

Return the rear seat backs in the upright position

1. Raise the backrest to the upright position.

2. Pull the passenger compartment of the upper edge of the rear seat backrests, in order to ensure a secure fit backs.

3. Fasten bias-lap belt mounted on the central rear seat. Check the location of the shoulder straps of seat belts for rear seat passengers.

Return the rear seat backs in the upright position if the rear seatback not fully returned to the upright position and uncommitted, it is dangerous. During emergency braking or sudden maneuvering of the vehicle seat back can suddenly fall down and injure passengers. If the release button for the visible red light, it indicates that the back seat is not fixed in a vertical position (Fig. 1.124).

After returning back to the upright position, make sure that the red light is not visible.