printable version
Programming with cards of ?�Advanced Key?�
Programming. Customizing the seat can be programmed using a worn map that included the system ?�Advanced Key?�, or using a remote control with folding key. Settings seat can only be programmed in the following conditions: - The ignition switch is set to ?�LOCK?� (locking), with an auxiliary key / retractable key must be removed from the ignition switch; - The driver's door open. 1 Set the seat to the desired position. Description of the driver's seat in different directions, see. On the following pages: the longitudinal adjustment of the seat, backrest adjustment, adjustable seat height and tilt cushion, 2. If the driver's door is closed, open it. 3. Press and hold the button ?�SET?�, simultaneously press and hold the release button locks on the remote control until you hear a short beep.
Automatic installation of the driver's seat in the programmed position. Unlock the doors with the remote that comes with the system ?�Advanced Key?�, or by using the remote with folding key. Then open the driver's door.
Cleaning the memory of the programmable device. When the following conditions, press and hold the lock button locks on the remote control to hear a short beep. - The ignition switch is set to ?�LOCK?� (locking), with an auxiliary key / retractable key must be removed from the ignition switch; - The driver's door is opened. Cleaning the memory of the programmable device driver's seat is also produced in the following cases: - When changing the code electronic immobilizer (immobilizer). - When disconnecting the battery from the vehicle electrical system (during maintenance or other reasons).
|