Using the buttons at the base of the seat

Programming.

Programming options to customize the seat can only be the vehicle is stationary.

1. Set the seat to the desired position.

2. Press and hold down the ?�SET?�, simultaneously press one of the buttons 1-3, you hear a short beep.

Disconnect the battery from the vehicle electrical system (for example, for maintenance or other reasons) erases the programmed settings of the seat. Then flash the memory driver seat.

Automatic installation of seats in the programmed position.

Turn the ignition switch to ?�LOCK?� (locking), open the driver's door, then press one of the buttons 1-3, which corresponds to the desired option to customize the driver's seat.

- Enable automatic installation seat position can also be programmed with the ignition (the ignition switch is turned to the ?�ON?�) and closed the driver's door.

To do this, press and hold down one of the buttons, which corresponds to the desired configuration options seats.

- Automatic installation of seats in the programmed position is switched off in the following cases:

- Pressing any key seat adjustment;

- When driving a car or when starting a vehicle from the scene;

- When you press the same button or 1-3 button ?�SET?�.