REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	6
		Operation and maintenance of car
			eleven Description of vehicle
			Restraint System
				Seat belts
					Instructions for use of seat belts
					Automatic locking mode dispensing belt
					Seat belts (except central belt in the back seat)
					Releasing the seatbelt
					Adjustable shoulder belt height
					Pyrotechnic pretensioners and load limiters seat belts installed in the front seat
					The central belt in the back seat (lap belt diagonally)
					Cars with a body "sedan" and "hatchback"
					Vehicles with bodies "versatile"
					Warning light air bag and seat belt pretensioners
					Child Safety
					Places installation of child restraints
					Installation of child restraints
					Installation of child restraints to the standard ISOFIX attachment
				Airbags - SRS system
			Car use to destination
			Troubleshooting arisen in a way or before driving
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

printable version

Seat belts (except central belt in the back seat)

Putting on a seatbelt.

1. Take the locking arm bracket.

Fig. 1.129. Pulling the belt: 1 - pemen; 2 - Stop Bracket

2. Gently and slowly pull the coil with bias-lap belt (Fig. 1.129).

3. Insert the locking bracket into the lock until a clear click.

Fig. 1.130. The correct position of the lap

4. Lower the lap belt on the hips as low as possible (strap should not be placed on the abdomen). Then adjust the shoulder straps of the belt, which should fit snugly to the body (Fig. 1.130).

« previos page
Automatic locking mode dispensing belt

next page »
Releasing the seatbelt