printable version
Lighting
Inclusion of light.
| Fig. 1.17. The direction of rotation and the fixed position of the handle at the end of the shift lever lighting: a - off; b - first fixed position; with - the second fixed position
|
To turn the lights, turn the knob on the end of the shift lever lighting (Fig. 1.17). By turning the knob to the first fixed position lights illuminate the parking lights, taillights, license plate light bulbs and instrument panel. When the knob is turned to the second fixed position light bulb headlights, parking lights lights, tail lights, license plate light bulbs and instrument panel. If the lever is pushed forward, turn on the high beam headlights; if pushed back, turn on dipped headlights.
Hazard warning lights. To turn the alarm signal light, pull the lever on the steering wheel. When you release the lever it will return to its original position. Emergency signal light can be switched on and switched off when the headlights. When the emergency light signal warning lamp lights up blue beam. In dangerous situations in traffic during the day and night to warn other road users on the system of hazard warning lights. In the future, always include it when working on emergency repairs, or when the vehicle is stopped on the edge of the road. To activate the system, press the switch, which operates independently from the ignition. Indicator lamps flash simultaneously.
Warning signal lighting system. If the engine is switched off, you forgot to turn off the lighting system, within a certain time will beep.
Direction indicators.
| Fig. 1.18. The direction of movement of the lever switch lights when the direction of rotation (a) and applying the turn signal before changing lanes (b)
|
To enable the pointer right turn move the switch up to turn on the indicator left turn move the switch down (Fig. 1.18). When the direction indicators flashing warning lamp. After passing the turn indicator lamp switches off automatically. To supply a turn signal before changing lanes, press the selector up or down until the increasing backpressure and hold in that position - the control lamp should blink at the same time with a turn indicator.
|