add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 / MX-6 (from 1982 to 1991, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 626 / MX-6
Home
 
Mazda
626 / MX-6
Operation of the vehicle
eleven Overview
The keys
Electric windows
The front seats
The tailgate / boot lid
Cover grille
Mirrors
Height-adjustable steering column
Fueling
Engine start
Transmission
Technical data transmissions
Apparatus maintain a constant speed (cruise control)
Lighting
Cleaners and washers of glasses
Controls, instrumentation and equipment
Heating and ventilation
Interior lighting
Lifting-sliding sunroof with electric drive
Parking brake
Starting with an external power source
Starting the engine by towing
Vehicle identification
Tips for car operation
Adjustments and service tehnichkskoe
Gas Engines
Diesel engine
System of cooling, heating and air conditioning
The power supply system of petrol engines
Ignition system
The system of emission control
Transmission
Brakes
Suspension and steering
Body
Electrical
The device, service and repair later releases
maintenance and repair of cars of release since 1986
Diagrams
 


Hit Counter by Digits


print page printable version

The front seats



Proper installation of seats needed to ensure:
- Easy access to controls;
- High ride comfort;
- Maximize the effectiveness of the seat belts and airbags.

The driver's seat

Areas of adjusting the position of the driver's seat
Fig. 14. Areas of adjusting the position of the driver's seat: 1 - knob supporting projection; 2 - the lever lumbar adjustment; 3 - the lever of adjustment of the longitudinal position of the seat; 4 - adjust lever front of the seat cushion; 5 - lever height adjustment of the rear of the seat cushion; 6 - the lever saving position of the seat back; 7 - the lever of the tilt adjustment of the seat back; and - the direction of the tilt of the head restraint; b - the moving direction of the reference projection; a - the direction of movement of lumbar support; d - direction of movement of the front seat; e - the direction of longitudinal movement of the seat; f - direction of movement of the rear of the seat cushion; g - the direction of inclination of the seat back; h - the direction of movement of the head restraint


Position the driver's seat can be adjusted in several different directions (Fig. 1.4).
The driver's seat is recommended to install as follows:
- The seat in the longitudinal plane, adjust so that the pedals can be fully squeeze slightly bent at the knees;
- Adjust the position of the seat back so that the backrest is adjacent to the back of the driver and the upper point of the steering wheel could get slightly bent arms.
For safety reasons it is only necessary to adjust the seat to the vehicle is stationary.
Fine adjustment of the position of the seat.
Press the lever down or pull it up and tilt the backrest forward or back.

A WARNING
During the movement can not be tilted too far back the seat back, as it significantly reduces the efficiency of the seat belts.

Adjustable lumbar support.
With a lever on the inside seat adjust the lumbar support. It can be installed in three different positions.
Adjusting the height of the front seat cushions. The height of the front of the seat cushion can be adjusted as follows:
- To lift the front of the seat cushion, pull the lever and the body gently press the back of the seat;
- To lower the front of the seat cushion, pull the lever and the body gently press the front of the cushion.
Adjusting the height of the rear of the seat cushion.
The height of the rear of the seat cushion can be adjusted with a lever.
Adjusting the seat in the longitudinal direction.
Pull the lever up and move the seat. Then release the lever and push the seat a little to trigger lock.

A WARNING
Do not insert any objects under the front seats - it can break the lock of the seat.

Tilt the head restraint.
The position of the head restraint can be adjusted by tilting it forward or backward.
Adjustment of the support arms.
Lateral support arms can be adjusted with the handle on the inner side of the seat back.
Saving the position of the seat back.
If the lever is set to save the preferred position of the seat within the area of conservation, this is the position of the backrest is retained and stored before the backrest position is canceled.

Provisions (A, B, C, D) save the seatback
Fig. 15. Provisions (A, B, C, D) save the seatback


If the lever is set to save the "A" back seat backrest can be folded back to the position "C" inclusive (Fig. 1.5). Position of the seat in a zone between the "C" and "B" can be saved.
If the lever is actuated save outside that area, always saved position "C".

A WARNING
Make sure to save the lever accidentally stepped foot passengers sitting in the back seat.

Landing on the rear seats

Location of the lever and pedal back to recline the front passenger seat and move the seat forward
Fig. 16. Location of the lever and pedal back to recline the front passenger seat and move the seat forward


The back of the front passenger seat folds forward, and the seat automatically moves forward if you pull the lever up or press the pedal (Fig. 1.6). After boarding or after disembarking move the seat back down until it is securely fixed.

A WARNING
During the movement of the passengers sitting in the back seat, you can not press the pedal.

Front seat heating system
Driver's seat and front passenger seat equipped with its own heating switch, which can be used only when the ignition key is in the ?�ON?� (?�II?�). Thermostat seat heating system includes heating at a temperature of less than 12 ?� C and turns off at 32 ?� C.
Individually recline the rear seatback
To increase the capacity of the luggage compartment rear seat backrest can be folded individually.
Folding the seat backrests.

Directions pulling the lock button and reclining rear seat backrest
Fig. 1.7. Directions pulling the lock button and reclining rear seat backrest


Pull the lock button and move the seat back down (Fig. 1.7).
Tilt the seatback up and push it down as long as it does not go into the lock.
Expanding backseat.
Fully expanded rear seat can be as follows.

The first three stages folding rear seat
Fig. 18. The first three stages folding rear seats: 1 - direction of removal of the head restraint; 2 - direction of movement of the lever lock the seat cushion; 3 - the direction of lifting the seat cushion


1. Remove the headrest (Fig. 1.8).
2. Pull the locking lever of the seat cushion.
3. Lift up the seat cushion at the front edge.

The last two stages folding rear seat
Fig. 19. The last two stages folding rear seat 1 - the direction of the tilt of the seat cushion; 2 - the direction of the tilt of the seat back


4. Fold the seat cushion forward (Fig. 1.9).
5. Pull the lock button and fold the seatback down.
When installing the cushion to its original position, pull the release lever seat and press down on the pillow.
After the seat back pull it forward to make sure that it is securely locked.

WARNINGS
When tilting the seat cushion to its original position, place the seat belts that can access them at any time.
When you recline the rear seat backrest can not stack luggage above the front seat backrest. Baggage must be securely fastened to the sudden braking or an accident, he could not be displaced forward and thereby create a dangerous situation.




« previos page
Electric windows
next page »
The tailgate / boot lid

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.