 printable version
Transmission
Manual Transmission Special locking eliminates switching by mistake with the 5th gear into reverse. The gear lever must first be set in the neutral position before turning on the reverse gear.
Automatic transmission Driving with automatic transmission
| Fig. 1.14. The selector lever of an automatic transmission
|
For a vehicle with an automatic gearbox in normal mode, you must include only the stage movement ?�D?�. If the selector lever needs to be moved into position ?�R?� or "P" or it must be translated from the position ?�D?� in position "2" or position "2" in position "1", press the button on the handle of the selector lever (Fig. 1.14). If you move the selector lever of the automatic gearbox at the position indicated by the arrow is black, press the button on the handle lever. At the direction of the arrow light, the gear lever can be moved without pressing the button.
WARNINGS By switching the lever from the neutral position or the parking position to the movement or reverse, press the brake pedal. Only when the car stops, set the selector lever to position ?�R?� or "P". Never increase the speed of the crankshaft of the engine to higher values on the forward gears while the brake. In no case do not hold the vehicle on gradients by increasing the speed of the crankshaft of the engine. Be sure to turn on the brake. Switching to the idle position of the ?�N?� or "P" in the position of the movement "1", "2?�, ?�D?� or ?�R?�. Switching to the idle position of the ?�N?� or "P" in the position of the movement "1", "2?�, ?�D?� or ?�R?�. |
Engine start When starting the engine the gear lever must be in position "P" or ?�N?�. "P" (park). The drive wheels are blocked. Selector should be placed in this position only when the vehicle is stopped. Before turning off this position when the ignition should be further depress the brake pedal.
A WARNING Park position can not be used as a parking brake. If you leave the vehicle even for a short time, always set the parking brake, includes a provision for parking and remove the key from the ignition switch. The car can not be left unattended with the engine running. |
?�R?� (reverse). It should be enabled only when the vehicle is stationary and the engine idling. In position ?�R?� when the ignition burn reversing lights. ?�N?� (neutral). The idle position. ?�D?� (movement). Transmission automatically switched from low to higher and vice versa, depending on the engine load and speed. Under certain driving conditions it is advisable to temporarily use one of the items below. "2" (the second step motion). This provision should be included in the motion in an intense or slow traffic flow when driving on uphill, downhill, and to achieve greater engine braking effect, when pulling away on slippery roads or in other situations where it is desirable to "smooth" acceleration. Pay attention to the fact that on the stage of the movement "2" does not exceed the speed of 120 km / h or 110 km / h (1.6 liters). "1" (the first stage of movement). This stage movement is provided for transferring large traction and movement on a steep slope or a steep downhill. Pay attention to the fact that on the stage of the movement "1" can not exceed the speed of 70 km / h or 60 km / h (1.6 liters). The unit forced proactive shift to a lower gear (?�Kick-down?�). The device provides the maximum in these conditions, movement acceleration of the vehicle. Once the force on the accelerator pedal exceeds a certain threshold value, depending on the rotational speed and the speed is switched to one of the lower gears. Switch to the next higher gear followed only when it reaches the maximum value of the engine speed of the engine. Starting on a significant rise. Left foot on the pedal and move the selector lever to position ?�D?� or "1". Right foot slowly depress the accelerator pedal and simultaneously release the brake pedal.
| 
