REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
			Carburetor Nikki 30/34
			The power supply system (engines 1,6 and 1,8)
				Introduction
				Specifications
				Release of pressure from the power supply system
				The fuel pump / pressure feed system
				Fuel tubes and connections
				Removal and installation of the fuel pump
				Fuel Level Sensor
				Fuel tank
				Air filter
				An accelerator rope
				Electronic fuel injection
			The power supply system (engines 2,0 and 2,5)
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

Air filter

Diagram of the air filter

1. Air Filter
2. Air Flow Sensor
3. Air intake pipe

4. The resonator
5. Hose fresh air

Refitting

PERFORMANCE ORDER

	1. Squeeze the tabs on the connector to connect the air flow sensor and disconnect.
	2. Remove the clamp and disconnect the hose from the valve cover.
	3. Loosen the clamp and remove the air intake pipe.
	4. Disconnect the hose from the air intake resonator.
	5. Remove the thin air hose from the resonator.
	6. Loosen the retaining clamp and remove the resonator.
	7. Turn off fixing bolts and remove the air filter.
8. Installation is spent upside-down removals.

« previos page
Fuel tank