REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
			Carburetor Nikki 30/34
			The power supply system (engines 1,6 and 1,8)
				Introduction
				Specifications
				Release of pressure from the power supply system
				The fuel pump / pressure feed system
				Fuel tubes and connections
				Removal and installation of the fuel pump
				Fuel Level Sensor
				Fuel tank
				Air filter
				An accelerator rope
				Electronic fuel injection
			The power supply system (engines 2,0 and 2,5)
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

Removal and installation of the fuel pump

PERFORMANCE ORDER

1. Let out pressure from the power supply system.
	2. Remove the rear seat and loosen the fixing screws (indicated by arrows) and remove the cover.

3. Disconnect the pump connection (left), unscrew the nut and disconnect the pump from above (right).
	4. Disconnect the fuel hose (Set right arrow), and a hose of the return pipeline (Set the left arrow).

5. Turn off fixing screws (left) and remove the pump (right).
	6. Disconnect a socket of connection and remove the clamp.
7. Remove the pump from the bracket.
8. Installation is spent upside-down removals. Replace sealing ring.