REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
			Carburetor Nikki 30/34
			The power supply system (engines 1,6 and 1,8)
				Introduction
				Specifications
				Release of pressure from the power supply system
				The fuel pump / pressure feed system
				Fuel tubes and connections
				Removal and installation of the fuel pump
				Fuel Level Sensor
				Fuel tank
				Air filter
				An accelerator rope
				Electronic fuel injection
			The power supply system (engines 2,0 and 2,5)
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

An accelerator rope

Withdrawal

PERFORMANCE ORDER

	1. Loosen the lock nut on the accelerator rope.
	2. Turn the throttle lever and disconnect the cable.
3. Pull the cable in the engine compartment and remove it from the vehicle.

Installation and adjustment

PERFORMANCE ORDER

1. Installation is spent upside-down removals.

2. Make sure the cable is fully open the throttle when the accelerator pedal. Check the free running of the cable.

3. To adjust the cable loosen the locknut and adjust the cable.

« previos page
Air filter