REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz E-Class

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	E-class
		Introduction
		Description of the model Mercedes E-Class
		Working conditions and tools
		Car Care
			Interior cleaning
			Car wash
			Cleaning Engine
			Grease
			Wiper and washer
				"Rain sensor"
				Worn wiper blades
				Check windshield washer and wiper
				Fill washer fluid in the windshield washer
				Replacing the wiper blades
				Windshield washer nozzles
				Installing nozzles
				Removing the windshield wiper arm
				Removal and installation of a windshield wiper motor-reducer
				Terminals gearmotor wiper
				Removing the rear screen wiper arm (T-model)
				Removing and installing rear window wiper motor-reducer (T-model)
				Possible malfunctions of the wiper blades, their causes and remedies
				Troubleshooting wiper, causes and remedies
			Care lacquered
		Diesel engines
		Petrol engines
		Transmission
		Chassis
		The brake system
		Electrical
		Shop
		Body
		Applications
		Diagrams

printable version

Installing nozzles

SEQUENCE OF WORK

Fig. 3.14. Installing the washer nozzles

Nozzles should be installed so that the holes were aimed above the middle of the window (Fig. 3.14), then the mode of intensive wiper washing of glass to be effective. If the jets are directed too low, the operation mode is often cleaner liquid will not have time to wash the entire working surface of the glass.

PRACTICAL ADVICE

Noise and squeaking glass cleaner

Reason creaking glass cleaner is the discrepancy angle brush corner of the glass, so when you work in one direction or another brush differently adjacent to the surface. This deficiency can be corrected by bending the lever. If it has not brought results, you need to apply to the body shop, where using a special measuring tool to determine the angle of inclination and put up a guarantee of the brush cleaner.

When installing nozzles use a pin or small paper clip. Carefully insert the nozzle into the nozzle and turn the nozzle to the desired angle.

« previos page
Windshield washer nozzles

next page »
Removing the windshield wiper arm