 printable version
Check and adjust ride height
Check and adjust the ride height of the axes
 | Check and adjust the ride height of the axes |
 | Check and adjust ride height axes - left rear measuring point |
 | Check and adjust ride height axes - front left measuring point |
Check and adjust the ride height of the axes
| - Corresponding illustrative material is presented in the illustrations, which includes all the links in the text.
- Please rate the degree of tread wear, replace the defective tires.
- Check the tire inflation pressure, if necessary, make appropriate adjustment.
- The height clearance of axles of a vehicle is determined from the slope of the corresponding lower arm suspension.
- Put a magnetic sensing element (086b) into the recess in the lower arm (4).
 | On models equipped with Xenon headlamps turn out a bolt (4a) so that it no longer protrude from the lever (4). Plate measuring element (086b) must accommodate the groove at an angle of 90 ?� to the direction of movement. |
- Record the measurement results for each arm of both suspensions.
- Adjusting the ride height of the front axle is made by adjusting the torsion spring planting poles.
- Adjusting clearance of the rear axle is performed by replacing the coil springs mount assemblies.
|
|
|
