 printable version
Check and adjustment of convergence
Check and adjust front wheel toe Check and adjust front wheel toe
| - Corresponding illustrative material presented naillyustratsiyah, which include all the links in the text.
- Install the front wheels in the straight-ahead position and secure the steering wheel by means of a special device.
 | Locking the steering wheel when checking and adjusting the convergence of the front wheels |
- Ensure the correct alignment of the steering actuator, - a neutral rail mounting groove joint assembly must be aligned with the mark on the body of the valve assembly input node rack gear (arrow). If necessary, Correct the position of the steering wheel, relegating it to a maximum of one tooth.
- To adjust the convergence release locknut (10f) and modify accordingly the position of tips of steering drafts (10) - make sure that did not have a twisted anthers.
|
|
Rear wheels Check and adjust the convergence of the rear wheels Check and adjust the convergence of the rear wheels
| - Corresponding illustrative material submitted for interfacing. graphics, which include all the links in the text.
- Check the ride height adjustment axes (see. Section Check and adjust ride height), if necessary, make appropriate adjustments.
- Adjustment is made by means of eccentric bolts (60a) in the longitudinal supports fixing extensions (60) on the subframe (50) rear suspension.
|
|
|
