|
printable version
The mechanism of the clutch
Withdrawal
PERFORMANCE ORDER | 1. Remove the check point (see. Subsection 9.1). | 2. Remove the release bearing, taking the bracket. | | 3. Knock out the pins (indicated by arrows) and remove the plug from the axle. | 4. Mark the orientation of the spring, remove the lever, and a spring fork. |
|
Check
PERFORMANCE ORDER | 1. Check the condition of the parts, replace worn parts. | 2. Drive out the sleeve axis and replace it. | 3. Replace the release bearing at the slightest sign of damage. |
|
Setting
PERFORMANCE ORDER | 1. Grease rubbing surfaces of the axis of refractory greasing. | 2. Place the fork arm in place. | 3. Install the plug and the spring, push the lever until it stops. | 4. Align the holes in the fork and press in the new pins. | | 5. Install the brackets (indicated by arrows), lightly lubricate the shaft and bearing. | | 6. Set the bearing so that the bracket engaging the plug. | 7. Check the freedom of movement in the fork axis. | 8. Replace the PPC. |
|
|
|