| 1. Check the battery, including the main beam headlights. |
| 2. In the dim light of headlights and check charge (or replace) the battery. |
| 3. In bright headlights include a starter, and if the lights prigasayut is faulty starter. |
| 4. If the lights remain on, but do not hear the click, the traction relay is faulty or its supply chain. |
| 5. With a weak rotation starter and a working battery is faulty or the starter or increased resistance to its supply chain. |
| 6. If you suspect that the poor condition of the circuit, unplug all cables and strip contacts, including bus connection with the mass of the engine, install the wires in place. |
| 7. If the battery and wires in satisfactory condition, check whether the voltage is applied to the magnetic switch. |
| 8. To do this, disconnect the wire from the relay contact and the flat through a lamp or a voltmeter connect to weight. |
| 9. Turn the ignition. |
| 10. If voltage is applied to the relay, the circuit is OK, otherwise check the wires (see Fig. Subsection 14.2.1). |
| 11. Check the power contacts on the traction relay of a starter by connecting them light or voltmeter. |
| 12. If the starter lamp is not lit (or not voltage), the magnetic switch must be replaced. |
| 13. If the circuit and the relay are correct, then it is recommended to replace the starter. |
