printable version
Seals replacement
Front oil seal 1. Remove the Gearbox (See below.).
| 2.3 Removing the front oil seal. |
| 2.7 Removing the rear oil seal. |
2. Remove the release bearing and remove the front cover bolts (photo) and remove the cover. 3. Hook and remove the seal from the cover (see photo). 4. Lubricate the mandrel and press in new shaft seal. Further assemblage is carried out in reverse order. Rear oil seal 5. Remove the propeller shaft. B. Disconnect the throttle rod inside the cabin. 7. Pry the screwdriver and remove the gland (photo). 8. Lubricate the mandrel and press in new shaft seal. Install the PTO shaft!
|