 printable version
The four-cylinder engine
Technical Data (all dimensions in mm) Numbering of cylinders | 1-2-3-4 | Operating procedure | 1-3-4-2 | Displacement: | Type Z24J (after 1987) | 2389 cm 3 | Type KA24E (after 1990) | 2389 cm 3 | Valve Clearances See. Chapter 1 |
| Engines Z24i if K24 (in parentheses are the different data of the day of the engine: K24, other data are the same) | Raspredvap |
| The diameter of the bearing journals 32.935 - 32.955 |
| End-play | 0.2 | Dimensions cams | 38,477-38,527 (44,839-45,0291 | Wear limit | 0.25 | Beating in the center of the middle bearing neck | 0.2 | Diameter supports | 33,000-33,025 | The gap in basic necks of a cam | 0,045-0,090 | Oil pump | Clearance meshed gears: | Standard | 0.12 | Limit | 0.20 | The gap between the driven gear and the pump housing | Standard | 0,15-0,21 | Limit | 0.50 | Allen clearance 0.06 | Deformation of the plane of the pump housing | 0,03 |
Torque (in Nm). Bolt camshaft sprocket | 110-130 | Tensioner bolt and pacifier chains | 6-9 (7-11) | Bolt pulley kolenvapa | 110-130 | Bolts cylinder head: | Stage 1 Tightening | 27 | Stage 2 | 70 | 3rd stage | Fully loosen the bolts | 4th stage | 27 | 5th stage | 65-75 | Bodty exhaust manifold | 15-18 | Bolts flywheel (a leading disk of the torque converter) | 115-125 (85-96) | Bolts cylinder head cover | 1-3 (3,6-7,2) | Front cover bolts (for Z24i) | M6 bolts | 4-8 | M8 bolts | 8,5-14 | Bolts and nuts intake manifold | 15-18 | Nuts and Bolts of the oil pallet | 4-6 | Bolts of the oil pump | 10-14 | Bolts roller rocker arms | 14-22 (32,4-36) |
| For connecting the candle with the distributor on the engine Z24i
|
| Location of cylinders and direction of rotation of the distributor
|
| 3.5a mark on the pulley about the division on the scale to set the piston at TDC.
|
|
