Adjustable drive |
1. Loosen the lock nut 9 and screwed onto the threaded rod shim 8 to loosen the rope 7. |
2. Remove the 2 fasteners at the lower end of the cable 7 Clutch. |
3. Pull the upper end of a rope clutch pedal clutch 24. |
4. Pull the cable 7 with the sheath 11 in the direction of the engine compartment. |
Self-drive |
5. Turn the forward gear segment 22 and lock it with the retainer 29. |
6. Remove the clutch cable. |
A warning Since 1988, at the upper tip of the rope clutch damper installed (see. Fig. Shock on the upper tip of the cable, installed in 1988). In this regard, the sealing ring is not mounted.
|
Models Year 1988 |
7. Press the clutch pedal 23 to stop several times. |
8. Compress the shell of a rope from an arm on a transmission housing (see. Fig. Adjustment of the cable (model year 1988)). |
9. Install the bracket 1 and secure it to the pin 2. |
10. Remove 2 fasteners (see. Fig. Drive clutch (transmission type 020) clutch cable. |
11. Disconnect the cable from the upper tip of the clutch pedal. |
12. Pull the cable 7 with the shell 11 in the direction of the engine compartment. |